20 21
English
FM2A78M-HD+
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
USB 2.0 Headers Besides four default USB 2.0
(9-pin USB6_7)
ports on the I/O panel, there
(see p.1 No. 16)
are two USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB8_9)
(see p.1 No. 17)
Serial ATA3 Connectors These six Serial ATA3
(SATA_1: see p.10, No. 8)
(SATA3) connectors support
(SATA_2: see p.10, No. 9)
SATA data cables for internal
(SATA_3: see p.10, No. 13)
storage devices. The current
(SATA_4: see p.10, No. 12)
SATA3 interface allows up to
(SATA_5: see p.10, No. 15)
6.0 Gb/s data transfer rate.
(SATA_6: see p.10, No. 14)
USB 3.0 Header Besides two default USB 3.0
(19-pin USB_10_11)
ports on the I/O panel, there is
(see p.1 No. 18)
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
1
To Next Page
Loading...
