EasyManua.ls Logo

ASROCK J4125B-ITX User Manual

ASROCK J4125B-ITX
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Version 1.0
Published December 2019
Copyright©2019 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
Question and Answer IconNeed help?

Do you have a question about the ASROCK J4125B-ITX and is the answer not in the manual?

ASROCK J4125B-ITX Specifications

General IconGeneral
Wi-FiNo
Ethernet LANYes
LAN controllerRealtek RTL8111H
Ethernet interface typeGigabit Ethernet
Cables includedSATA
Audio chipRealtek ALC887
Component forPC
PC health monitoringFAN, Temperature, Voltage
Audio output channels7.1 channels
Motherboard form factormini ITX
Motherboard chipset familyIntel
Windows operating systems supportedWindows 10 x64
PS/2 ports quantity1
eSATA ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
USB 2.0 connectors2
OpenGL version4.4
DirectX version12.0
Maximum resolution4096 x 2160 pixels
Parallel processing technology supportNot supported
Supported storage drive typesHDD & SSD
Supported storage drive interfacesSATA III
BIOS typeUEFI AMI
ACPI version5.0
BIOS memory size128 Mbit
System Management BIOS (SMBIOS) version3.0
Memory channelsDual-channel
Memory slots typeDIMM
Supported memory typesDDR4-SDRAM
Maximum internal memory8 GB
Supported memory clock speeds2133, 2400 MHz
Processor cores4
Processor modelJ4125
Processor socket-
Compatible processor seriesIntel® Celeron®
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Width170 mm

Summary

Motherboard Layout

I/O Panel

Chapter 1 Introduction

1.1 Package Contents

Lists all items included in the motherboard package, such as the motherboard itself, guides, cables, and I/O shield.

1.2 Specifications

Provides detailed technical specifications for the motherboard, including CPU, memory, expansion slots, and graphics.

Chapter 2 Installation

Pre-installation Precautions

Outlines essential safety measures and precautions to take before installing motherboard components to prevent damage.

2.1 Installing Memory Modules (SO-DIMM)

Guides users on how to properly install DDR4 SO-DIMM memory modules into the motherboard slots.

2.2 Expansion Slot (PCI Express Slot)

Details the PCI Express slot, its type, and usage for expansion cards, including compatibility notes.

2.3 Jumpers Setup

Explains the function and setup of jumpers, specifically the Clear CMOS jumper, for system parameter resets.

2.4 Onboard Headers and Connectors

Describes various onboard headers and connectors, their pin assignments, and their functions for system connections.

Contact Information

DECLARATION OF CONFORMITY

EU Declaration of Conformity

Related product manuals