ASROCK P4VM8 - Installing Windows 98; ME; 2000; XP Without RAID Functions

2020
2020
20
2.102.10
2.102.10
2.10
Installing Windows 98 / ME / 2000 / XPInstalling Windows 98 / ME / 2000 / XP
Installing Windows 98 / ME / 2000 / XPInstalling Windows 98 / ME / 2000 / XP
Installing Windows 98 / ME / 2000 / XP
Without RAIDWithout RAID
Without RAIDWithout RAID
Without RAID
FunctionsFunctions
FunctionsFunctions
Functions
If you want to install Windows 98 / ME / 2000 / XP on your SATA HDDs without
RAID functions or you want to install Windows 98 / ME / 2000 / XP on your IDE
HDDs instead of SATA HDDs, please follow the below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY¡÷Advanced screen ¡÷IDE Configuration.
B. Set the “SATA Operation Mode” option from [RAID] to [non-RAID].
STEP 2: Install Windows 98 / ME / 2000 / XP OS on your system.
After setting up BIOS, you can start to install Windows 98 / ME / 2000 /
XP on your
system.
If you don’t want to set up RAID functions, there is no need to make a SATA
driver diskette.
If you want to install Windows 98 / Windows ME on your SATA HDDs without
RAID functions, you don’t have to set up BIOS. Please install Windows 98 /
Windows ME OS on your system directly.