ASROCK PHANTOM GAMING Z790 RIPTIDE WiFi - Page 35

31
Z790 Riptide WiFi
Power LED and Speaker Header
(7-pin SPK_PLED1) (see p.7, No. 20)
Please connect the chassis power LED and the chassis speaker to this header.
Serial ATA3 Connectors
Ver tical:
(SATA3_0) (see p.7, No. 22)
(SATA3_1) (see p.7, No. 21)
Right Angle:
(SATA3_2) (see p.7, No. 17) (Lower)
(SATA3_3) (see p.7, No. 17) (Upper)
(SATA3_4) (see p.7, No. 16) (Lower)
(SATA3_5) (see p.7, No. 16) (Upper)
(SATA3_6) (see p.7, No. 15) (Lower)
(SATA3_7) (see p.7, No. 15) (Upper)
ese eight SATA3 connectors support SATA data cables for internal storage
devices with up to 6.0 Gb/s data transfer rate.
SPK_PLED1
SATA3_4 SATA3_6
SATA3_5 SATA3_7
SATA3_2
SATA3_3
SATA3_1
SATA3_0
1
+5V
DUMMY
PLED+
PLED+
PLED-
DUMMY
SPEAKER