ASROCK PV530 - DRAM Timing Configuration

2424
2424
24
BIOS SETUP UTILITY
DRAM Timing Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OC Tweaker
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
DRAM tCL
[Auto]
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM tRFC
DRAM tWR
DRAM tWTR
DRAM tRRD
DRAM tRTP
DRAM tFAW
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Specifies the CAS
Latency Time.
DRAM Timing Configuration
DRAM tCL
This controls the number of DRAM clocks for TCL. Configuration options:
[4T] to [11T] for DDR3, [3T] to [9T] for DDR2. The default value is [Auto].
DRAM tRCD
This controls the number of DRAM clocks for TRCD. Configuration options:
[4T] to [11T] for DDR3, [2T] to [9T] for DDR2. The default value is [Auto].
DRAM tRP
This controls the number of DRAM clocks for TRP. Configuration options:
[4T] to [11T] for DDR3, [2T] to [9T] for DDR2. The default value is [Auto].
DRAM tRAS
This controls the number of DRAM clocks for TRAS. Configuration options:
[15T] to [30T] for DDR3, [5T] to [20T] for DDR2. The default value is [Auto].
DRAM tRFC
This controls the number of DRAM clocks for TRFC. Configuration options:
[30T] to [156T]. The default value is [Auto].
DRAM tWR
This controls the number of DRAM clocks for TWR. Configuration options:
[4T] to [11T] for DDR3, [2T] to [9T] for DDR2. The default value is [Auto].
DRAM tWTR
This controls the number of DRAM clocks for TWTR. Configuration options:
[3T] to [9T] for DDR3, [2T] to [9T] for DDR2. The default value is [Auto].
DRAM tRRD
This controls the number of DRAM clocks for TRRD. Configuration options:
[2T] to [9T]. The default value is [Auto].
DRAM tRTP
This controls the number of DRAM clocks for TRTP. Configuration options:
[3T] to [6T] for DDR3, [2T] to [5T] for DDR2. The default value is [Auto].