2525
2525
25
DRAM tFAW
This controls the number of DRAM clocks for TFAW. Configuration options:
[0T] to [15T] for DDR3. The default value is [Auto].
VCORE Voltage
Use this to select VCORE Voltage. Configuration options: [Auto], [1.265V]
to [1.325V]. The default value of this feature is [Auto].
VCCM(DRAM) Voltage
Use this to select VCCM(DRAM) Voltage. Configuration options: [1.48V] to
[1.88V] for DDR3, [1.80V] to [2.21V] for DDR2. The default value of this
feature is [Auto].
Chipset Voltage
Use this to select chipset Voltage. Configuration options: [Auto], [1.20V]
to [1.35V]. The default value of this feature is [Auto].
VTT Voltage
Use this to select VTT Voltage. Configuration options: [Auto], [1.05V] to
[1.10V]. The default value of this feature is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.
To Next Page
Loading...
