ASROCK PV530A-ITX - Voltage and User Defaults

2525
2525
25
DRAM tFAW
This controls the number of DRAM clocks for TFAW. Configuration options:
[0T] to [15T]. The default value is [Auto].
VCORE Voltage
Use this to select VCORE Voltage. Configuration options: [Auto], [1.265V]
to [1.325V]. The default value of this feature is [Auto].
VCCM(DRAM) Voltage
Use this to select VCCM(DRAM) Voltage. Configuration options: [1.48V] to
[1.88V]. The default value of this feature is [Auto].
Chipset Voltage
Use this to select chipset Voltage. Configuration options: [Auto], [1.20V]
to [1.35V]. The default value of this feature is [Auto].
VTT Voltage
Use this to select VTT Voltage. Configuration options: [Auto], [1.05V] to
[1.10V]. The default value of this feature is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.