ASROCK RIPTIDE Z790 PG - Page 40

English
36
ADDR_LED2
ADDR_LED3
1
Connect your Addressable RGB LED strips
to the Addressable LED Headers (ADDR_
LED1 / ADDR_LED2 / ADDR_LED3) on
the motherboard.
VOUT
DO_ADDR
GND
1
ADDR_LED1
Addressable LED Headers
(3-pin ADDR_LED1) (see p.6, No. 27)
(3-pin ADDR_LED2) (see p.6, No. 8)
(3-pin ADDR_LED3) (see p.6, No. 7)
ese headers are used to connect Addressable LED extension cables which allow users
to choose from various LED lighting eects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.