ASROCK WRX80D8-2T - Page 58

52 53
English
OCU2 Mode Selection
is allows you to congure OCU2 PCIE(x4)/OCU2_SATA(0-3) Mode.
Onboard Debug Port LED
Enable or disable the onboard Dr. Debug LED.
Restore AC Power Loss
Select the power state aer a power failure. If [Power O] is selected, the power will remain
o when the power recovers. If [Power On] is selected, the system will start to boot up
when the power recovers.
Restore AC Power Current State
is allows you to restore AC Power Current State.