ASROCK Z690M-ITX/ax - Page 71

63
English
Z690M-IT X/ax
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Ring PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
System Agent PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Atom Core PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
Memory Controller PLL Voltage Oset
Use this feature to set the PLL Voltage Oset value from 0-15 with each unit at
17.5mV. is is used to increase the range of the domain frequency in extreme
overclocking conditions. Enter 0 to use the manufacturer default value.
AVX Conguration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00 will
decrease the voltage guardband.
FIVR Conguration
Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode, the
voltage is interpolated only in turbo mode.
Core Extra Turbo Voltage
Species the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Oset Mode
Selects between Legacy and Selection modes. Need Reset System aer enabling