ASROCK Z690M-ITX/ax - Page 72

64
English
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global oset for the entire VF curve. In Selection modes, setting a selected VF point.
VF Conguration Scope
Allows all cores VF curve or per-core VF curve conguration.
Core Voltage Oset
Species the oset voltage applied to the IA Core domain. is voltage is specied
in millivolts.
Oset Prex
Sets the oset value as positive or negative.
E-Core L2 Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the
voltage selected will be applied over all operating frequencies. In Adaptive Mode
the voltage is interpolated only in turbo mode. Uses Mailbox 0SR 0x150, cmd 0x10,
0x11.
E-Core L2 Extra Turbo Voltage
Species the extra turbo voltage applied while Atom L2 is operating in turbo mode.
Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
E-Core L2 Voltage Oset
Species the Oset Voltage applied to the Atom L2 domain. is voltage is specied
in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV.
Oset Prex
Sets the oset value as positive or negative.
Ring Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the
voltage selected will be applied over all operating frequencies. In Adaptive Mode
the voltage is interpolated only in turbo mode. Uses Mailbox 0SR 0x150, cmd 0x10,
0x11.
Ring Extra Turbo Voltage
Species the extra turbo voltage applied while ring is operating in turbo mode. Uses
Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV.
VF Oset Mode
Selects between Legacy and Selection modes. Need Reset System aer enabling