English
36
1
ADDR_LED1
Addressable LED Header
(3-pin ADDR_LED1) (see p.6, No. 2)
is Addressable LED header is used to connect
Addressable
LED extension cable which
allows users to choose from various LED lighting eects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power o your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. e RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
GND), with a maximum power rating of 3A (5V) and length within 2 meters.
Connect your
Addressable RGB LED
strips
to the
Addressable LED Header (ADDR_
LED1)
on the motherboard.
To Next Page
Loading...
