Need help?Do you have a question about the ASROCK Z97 Extreme4 and is the answer not in the manual?
General| ECC | No |
|---|---|
| Non-ECC | Yes |
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 4 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 32 GB |
| Supported memory clock speeds | 1066, 1333, 1600, 1866, 2133, 2400, 2800, 2933 MHz |
| Processor socket | LGA 1150 (Socket H3) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Intel® Core i3/i5/i7/i9 series | i3-4xxx, i5-4xxx, i7-4xxx |
| Maximum number of SMP processors | 1 |
| USB 2.0 connectors | 2 |
| Number of SATA III connectors | 8 |
| Number of Parallel ATA connectors | 0 |
| RAID levels | 0, 1, 5, 10 |
| Supported storage drive interfaces | SATA III |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 6 |
| Ethernet interface type | Gigabit Ethernet |
| Audio chip | Realtek ALC1150 |
| Cooling type | Passive |
| Certification | FCC, CE, WHQL, ErP/EuP |
| Component for | PC |
| Motherboard chipset | Intel® Z97 |
| PC health monitoring | CPU, FAN, Power supply, Temperature |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Graphics card | HD Graphics 4000 |
| DirectX version | 11.1 |
| Maximum resolution | 4096 x 2304 pixels |
| Maximum graphics card memory | 1792 MB |
| Parallel processing technology support | 2-Way CrossFireX, 2-Way SLI, 3-Way CrossFireX, Quad-GPU CrossFireX, Quad-GPU SLI |
| PCI Express x1 (Gen 2.x) slots | 3 |
| BIOS type | EFI AMI |
| ACPI version | 1.1 |
| BIOS memory size | 64 Mbit |
| Cables included | SATA |
Weight and Dimensions| Width | - mm |
|---|
Details the technical specifications of the motherboard hardware.
Safety guidelines and precautions before installing hardware.
Step-by-step guide for installing the Central Processing Unit.
Instructions for mounting the CPU cooling solution.
Guide for inserting RAM modules into the motherboard slots.
Information on using PCI Express slots for expansion cards.
Details on connecting front panel headers and internal connectors.
Steps for installing an M.2 SSD on the motherboard.
Guide to installing essential drivers from the support CD.
Guide to the overclocking settings within the UEFI utility.
Settings related to the CPU, cores, and power states.
Settings for SATA controllers, modes, and boot devices.
To Next Page
