Z97E-ITX/ac
29
English
Step 3
e stando is placed at the nut
location B by default. Skip Step 4 and
go straight to Step 5 if your M.2_SSD
(NGFF) module is type 2242. If your
M.2_SSD (NGFF) module is type
2230, go to Step 4.
Step 4
Peel o the yellow protective lm on
the nut location A. Hand tighten the
stando into the nut location A on
the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only ts in one
orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com
B
A
B
A
AB
AB
B
A
To Next Page
Loading...
