1 of 12
DR100 Aperio
®
Wireless
Card Reader with Relay (BASIC MODE)
Installation & Operating Instructions
Product Components
Standard Installation
A Reader
B Relay Housing
C Mounting Bracket
D (2X) 6-32 x 1/2"
Type F Self
Tapping Screws
E T8 Security
Torx Bit
F 4-40 Pan Head
Screw
G 4-40 Security
Torx Screw
H 2mm Slotted Bit
Product Contents
Secure Installation Kit
A Reader Backplate
B Secure Side
Relay Cover
C (4X) 4-20 Self
Tapping screw
D T8 Security Torx Bit
E 4-40 Security
Torx Screw
F Alcohol Swab
G Wire Sealing
Grommet
H Wire Harness
Extender
Product
Specs
Diagram 2 Product Components Secure Kit
A
C
D
E
H
F
G
B
A
C
D
E
F
G
H
B
Parameter Values
Power Supply 12 – 24 VDC
Operating Temperature 14˚ to 151˚ F [-10˚ to 66˚ C]
Cold Weather Pack
Operating Temperature*
-40˚ to 151˚ F [-40˚ to 66˚ C]
Storage Temperature -40˚ to 185˚ F [-40˚ to 85˚ C]
Max Operating
Relative Humidity
93 % RH at 89˚ F
IP Class IP65
Network IEEE 802.15.4 (e.g. Aperio) 2.4 GHz
BLE Bluetooth 4.0
Max Operating Current Draw 57.4 m A
Max Current Draw with
Heater Activated*
123 mA at 12 V | 245 mA at 24 V
Inputs
2 DPS, Digital input**
Close / Open Externally Accessible
REX, DX, and Privacy are not functional
at release. (Release date TBD)
1 REX, Digital input
1 DX (Deadbolt Switch)
1 Privacy
Outputs
# of Relays 3
Relay Switching
Capacity, Max
2A per Relay***
1 Tamper Relay Housing Side
2 Tamper Reader Side
Diagram 1 Product Components Standard
*Requires extreme cold temperature hardware pack.
** 2 DPS can be used with device however only
one DPS signal will be sent to EAC.
***6A max operating current draw total for product when all
relays are in the wetted configuration and fully loaded.