Assa Abloy Yale Access Kit User Manual

3
Your Yale Access app should look like this
once you have logged into your account for
the first time.
SET UP YALE ACCESS MODULE
Step 2
• Wi-Fi bridge cannot be registered until the module registration is complete.
• Make a note of the serial number beforehand, as you may need to use this if the QR code doesn’t
register or you want to set this up manually.
IMPORTANT!
• The serial number always uses zero’s not the letter “O” (See pic ‘M13S0C1UR’)
• Always remove at least one battery before inserting the module* (This step allows the lock to recognise the
Network Module and begin the pairing)
Serial number
*If you don’t remove a battery before inserting the module, only the numbers 1 to 6 will show

Assa Abloy Yale Access Kit Specifications

General

Brand	Assa Abloy
Model	Yale Access Kit
Category	Accessories
Language	English