EasyManua.ls Logo

Assmann Büromöbel SYMPAS (J) STS - User Manual

Assmann Büromöbel SYMPAS (J) STS
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BENUTZERINFORMATION
INSTRUCTION SHEET
SYMPAS (J) STS
Bitte lesen Sie diese Anleitung und bewahren Sie sie zur Unterstützung während des Betriebs und der Wartung dieses Qualitätsprodukts auf. Technische Änderungen
vorbehalten, alle Angaben ohne Gewähr. Benutzerinformation siehe Sichttasche an der Tischplattenunterseite.
Please read and retain this instruction manual to assist you in the operation and maintenance of this quality product. Subject to technical modications; no responsibility is
accepted for the accuracy of this information. User information see clear pocket on the table plate bottom.
Question and Answer IconNeed help?

Do you have a question about the Assmann Büromöbel SYMPAS (J) STS and is the answer not in the manual?

Summary

Basic Safety Instructions

Oil Resistance Warning

Jiecang products are not resistant to cutting oils.

Product Opening Warning

Risk of malfunction/injury when opening motor casings, control box, or hand switch.

Liquid Ingress Warning

Prevent liquids in plug connections to avoid short circuits.

Crushing Hazard Warning

Maintain 25mm distance from objects to prevent crushing injuries.

Child Usage and Supervision

Guidelines for safe use by children aged 8+ and supervision requirements.

Damaged Power Cable

Replace damaged power cables with equivalent ones for safe operation.

Electric Shock Precaution

Disconnect desk from mains before maintenance or cleaning.

Duty Cycle and Overheating

Adhere to duty cycle limits to prevent motor overheating and system damage.

Cable Integrity Check

Ensure no cables are damaged; replace defective parts immediately.

Technical Data

Control and Motor System

Details on the JIECANG Linear Motion Technology Co., Ltd. control and motor system.

Adjustment Mechanism

Specifies the spindle adjustment mechanism in the leg.

Synchronization

Describes electrical synchronization via the control unit.

Lift Column Dimensions

Provides tube diameters for the lift columns.

Operating Temperature Range

Specifies the temperature range for operation.

Maximum Relative Humidity

Indicates the maximum permissible relative humidity.

Rated Voltage and Frequency

Lists the rated voltage and frequency for the device.

Intermittent Periodic Duty

Details the duty cycle (2 min on / 18 min off).

Maximum Load Capacities

Specifies maximum loads for desk, CPU holder, and equipment holder.

Protection Class

Identifies the protection class as IP 20.

Power Consumption

Details power consumption during lifting and in standby mode.

Traversing Speed

States the desk's traversing speed without load.

Adjustment Range

Specifies the maximum adjustment range of the desk.

Control Panel Features

Describes standard up/down controls and optional memory function.

Noise Emission

Provides the noise emission level in dB(A).

Rating Plate Locations

Indicates where rating plates are located on the system.

EC Declaration of Conformity

Product and Type Information

Identifies the product as a desk and its type.

Manufacturer Details

Provides manufacturer name, address, and contact information.

Applied Directives

Lists the European directives the product complies with.

Applied European Standards

Lists relevant European standards for office furniture.

Validity Conditions

States conditions under which the declaration ceases to be valid.

Control Panel Functions

JCHT35 L Without Memory Function

Explains operation using UP/DOWN buttons for height adjustment.

JCHT35 K With Memory Function

Describes height adjustment and saving positions using memory buttons.

Collision Detection System

Notes the presence of a collision detection system for protection.

Ergonomics

Optimal Seating Position

Guidance on adjusting seat and table height for a 90° angle between thigh and lower thigh.

Optimal Desktop Height

Guidance on adjusting table height for a 90° angle between arm and forearm.

Assmann Büromöbel SYMPAS (J) STS Specifications

General IconGeneral
BrandAssmann Büromöbel
ModelSYMPAS (J) STS
CategoryIndoor Furnishing
LanguageEnglish