Assum DZ-400/2E - Table of Contents

Contents
Foreword/Description/Responsibilities∙∙∙1 8.Failure Analysis and solutions
1.Product instruction 1)Machine failure and solution∙∙∙∙∙∙∙∙28
1) Application∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙2 2)Vacuum pump failure & solution∙∙29
2) Product Features∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙2 3) Solenoid valve failure & solution∙30
3) Work Principle∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 2 4).Sealing problem and solutions∙∙∙∙30
4) Product Model Name∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙2 9. Equipment storage
5) Main parameters∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙3 1)short time storage∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙30
2.Safety 2)Long time storage∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙30
Ready to use∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9 3) Start machine after storage∙∙∙∙∙∙∙∙31
1) Safety precautions∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9
2) Use of the environment∙∙∙∙∙∙∙∙∙∙∙∙10
3.Handling equipment
1) Equipped with carton packaging∙∙∙∙∙∙∙∙10
2) Equipped with wooden packaging∙∙∙∙∙10
4.Installation
1) Installation condition∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙11
2) Installation Environment∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙12
3) Filling Oil∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙12
4) Electrical connection ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙13
5) Connection inflation system∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14
6) Connecting vacuum system∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙15
5.Start-up & Debugger
1) control panel∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙15
2) Turn on the power∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙16
3) Check the pump motor rotation direction∙∙∙∙∙∙16
6.Standard operation and parameter settings
1) Standard operating procedures∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙17
2) Control program cycle description∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙18
3) parameter settings∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙20
4) Optimal parameters∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙21
5) Packaging liquid products∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙22
6) Best packaging∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙22
7.Machine maintenance
1) Standard maintenance schedules∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙23
2) Vacuum pump maintenance∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙23
3) Vacuum pump oil∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙26
4) Replace high temp. tape, electric heating wire∙∙∙∙∙∙∙∙∙∙26
5) Replace silicone∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙27
6) Replace the seals∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙28