ASTEC 40 Series User Manual

IB-2003
S
eries 40 Trans
fl
ite-
S
tationary
C
onveyor
19
Safety First!
This symbol is used to bring
attention to safety precautions
and instructions.
When you see this symbol, be
alert and pay attention to all
instructions.
YOUR PERSONAL SAFETY
IS INVOLVED
Most accidents are caused
by failure to observe basic
safety rules or precautions. An
accident can often be avoided
by recognizing potentially
hazardous situations before
an accident occurs.
Improper operation is
dangerous and could result
in injury or death.
Basic safety precautions
are outlined in the “SAFETY
PRECAUTIONS” portion of
this publication and in the
description of operations
where hazards exist.
Warning decals have also
been placed on the equipment
to provide instructions and to
identify specifi c hazards which,
if not heeded, could cause
bodily injury or death to you
or other persons.
KPI-JCI, Inc. cannot anticipate
every possible circumstance
that might involve a potential
hazard. The warnings in
this publication and on the
equipment are therefore not
all inclusive.
If an operation is not performed
as specifi cally recommended
by KPI-JCI, Inc. you must
satisfy yourself that it is safe
for you and others. You should
also ensure that the equipment
will not be damaged or made
unsafe by the method of
operation you choose.
The following signal words
may be used in this manual
to designate a degree or level
of hazard and are defi ned as
follows.
DANGER
NOTICE
NOTICE is used for specifi c
practices that are critical to
the operation or maintenance
of the equipment.
CAUTION
CAUTION without the safety
symbol is used for practices
that could result in damage to
the machine if not observed.
CAUTION
CAUTION with the safety
symbol is used for potentially
hazardous situations which,
if not avoided, may result in
minor or moderate injury. It
may also be used to alert
against unsafe practices.
!
WARNING
!
WARNING is used for potentially
hazardous situations which,
if not avoided, could result in
death or serious injury.
DANGER is used for imminently
hazardous situations which,
if not avoided, WILL result in
death or hazardous injury.
!

ASTEC 40 Series Specifications

General

Brand	ASTEC
Model	40 Series
Category	Industrial Equipment
Language	English