Safety
IB-2003
eries 40 Trans
ite-
tationary
onveyor 22
Magnet Safety
1. Magnetic fi eld can be
harmful to pacemaker
wearers. Pacemaker
wearers shall maintain a
minimum safe distance of
16-1/2’ (5 meters) from
the magnet.
2. Strong magnetic fi eld can
produce sudden
interaction with metallic
objects. U s e
caution when handling
objects near magnet.
10. Safe working load of the
platform is 136 kg (300 lbs.).
Operating Safety Area
1. Keep away from receiving
hopper and loading area.
2. Keep away from
discharge end.
3. Always be aware of the
location of other
personnel and keep them
away from hazard areas.
4. Keep away from power
lines when relocating or
transporting the conveyor.
Maintenance Safety
1. It is the owner/operator’s
responsibility to provide a
safe method of access to
certain service areas such
as head pulley bearings and
hub.
Do not use the conveyor belt
as a walkway to access
these areas.
2. Read and understand the
Operator’s Manual before
lubricating, servicing or
working around this
machine.
3. Follow lockout/tagout
procedure and wait for all
motion to stop before
lubricating, adjusting or
servicing.
4. Follow good shop
practices.
5. Make sure all guards are
in place and properly
secured when
maintenance work is
completed.
6. Never wear poor fi tting,
baggy or frayed clothing
when working around or
on any of the drive system
components.
7. Relieve pressure from the
hydraulic circuit before
servicing or maintaining
system.
8. Keep hands, feet, hair and
clothing away from
moving or rotating parts.
9. Clear the area of
bystanders when carrying
out any maintenance or
adjustment.
To Next Page
Loading...
Need help?
General
