•
•
•
1 2 3 4
•
5 6
•
LECTROFAN MICRO is a
revolutionary sound machine
and wireless portable audio device
combining the latest Bluetooth®
speaker technology and the
acclaimed sleep sound science of
Adaptive Sound Technologies, Inc.
You can mask noises, relax, and
sleep better using 10 di erent
sounds including four white noise
selections, fi ve fan sounds, or
the ocean waves SoundScape. The
distinctive speaker design swivels
up or down to easily fi t anywhere
and be rotated for directional
sound control. Simply turn the
top part of the LectroFan micro
to adjust it as you like.
All of this capability is controlled
by three buttons, as shown in the
images above.
Each button has two types
of actions:
1. The fi rst action (Power On/O ,
Volume Up, or Volume Down) is
activated by holding down the
button for at least a couple of
seconds— called a “Long Press.”
2. The second action (Play/Pause,
Previous Sound/Song, or
Next Sound/Song) is activated
by briefl y pressing the button—
called a “Short Press.”
Before you can use your LectroFan
micro as a Bluetooth speaker, you
need to pair it with your audio source,
such as your smart phone. This only
needs to be done once for each
audio source.
1. First, turn on the Bluetooth feature
of your LectroFan micro with a Long
Press of the Power/Pause button.
You will hear the tones indicating
that the Bluetooth feature is turning
on and the Blue status light will fl ash.
2. Set your audio source to look for
new Bluetooth devices and select
the LectroFan micro device. If a PIN
is required, use 0000. Two tones will
indicate that the pairing is complete.
See your audio source’s instructions
for pairing, if needed.
I. When your LectroFan micro is o :
A Short Press of the Power/Pause
button will turn the Sound Masking
feature On.
2. When your LectroFan micro is on:
A Short Press of the Power/Pause
button will turn your LectroFan
micro O .
USING YOUR LECTROFAN MICRO AS SOUND MASKING MACHINE
USING YOUR LECTROFAN MICRO AS A BLUETOOTH SPEAKER
When choosing your SoundStory:
1. Short Pressing the V+/<< button
will select the Previous SoundStory.
2. Short Pressing the V-/>> button
will select the Next SoundStory.
– Long Presses of either of these
last two buttons will adjust the
volume of the micro.
* Note: to max volume on micro,
ensure your playback device is
raised to max volume.
Once paired and connected, you
can change the volume with a
Long Press of the V+/<< or V-/>>
keys to increase or decrease the
volume. Pressing the Power/Pause
button briefl y will pause the audio
and pressing it again will resume
the audio.
A Long Press of the Power/Pause
button will turn your LectroFan
micro O , when in Bluetooth
Speaker mode.
When paired and connected to
a smart phone, you can answer an
incoming phone call with a Short
Press of the Power/Pause button.
Another Short Press of the Power/
Pause button will end the call. During
the phone call, the audio stream will
be paused.
LOCATION OF PARTS
AND CONTROLS
1. Microphone
2. Power/Play/Pause Button
3. Volume +/Track Back Button
4. Volume – / Track FWD Button
5. LED Indicator
6. Micro USB Charging Port
7. Micro USB Charging Cable
(not shown)
LectroFan-Swivel Speaker-REV.indd 1 7/20/16 6:31 PM
To Next Page
Need help?
General
