To Next PageTo Next Page
Need help?Do you have a question about the Astralpool LumiPlus RAPID and is the answer not in the manual?
General| Voltage | 12V AC |
|---|---|
| Light Source | LED |
| IP Rating | IP68 |
| Category | Underwater lighting |
| Material | Polycarbonate |
| Warranty | 2 years |
| Luminous Flux | 1485 lm |
| Type | Pool Light |
| Color Options | RGB |
Advice on projector density, glare avoidance, and placement for different pool types.
Precautions for handling, mounting on piping, and recommended installation depth.
Procedure for mounting on Ø63 PN-6/10 piping using an adaptor.
Steps for attaching to Ø63 piping with a G1"1/2 bushing and adaptor.
Installation on flush wall conduits using adaptors and O-rings.
Procedure for installing the projector in a mini snap-in niche.
Steps for mounting in liner pools using bushings and wall conduits.
Installation on nozzles in polyester pools and SPAs.
Instructions for removing and replacing the projector bulb.
Crucial safety measures including voltage, handling, and general warnings.
Important operational guidelines like water temperature and chemical resistance.
Warning against staring into the luminaire at close distances.
Explains protection against electric shocks via safety extra-low voltage.
Indicates EC directives compliance and the requirement for a safety transformer.
Instruction to replace cracked protective shields.
