What to do if Astralpool LUMIPLUS FLEXI Underwater lighting Control Motion is not responding?
If your Astralpool Underwater lighting Control Motion is not responding, the batteries may be low. Replace the batteries to resolve this issue.
Why is my Astralpool Underwater lighting LumiPlus Flexi projecting the wrong color?
If your Astralpool Underwater lighting LumiPlus Flexi projects a different color than shown on the Control Motion Central Display, it may not be receiving information. Try these steps: 1. Get closer to the LumiPlus Flexi before sending a command. 2. Avoid covering the antenna with your hand. 3. Press the REFRESH button.
Details how to use the remote control for functions such as color selection, sequence changes, and speed adjustments.
Explains how to change colors and sequences by physically manipulating the control device.
General| IP Rating | IP68 |
|---|---|
| Category | Underwater Lighting |
| Brand | Astralpool |
| Material | Polycarbonate |
| Light color | White |
| Light Source | LED |
| Warranty | 2 years |
| Type | LED |
| Voltage | 12V |
| Control | On/Off |
| Model | LUMIPLUS FLEXI |
To Next Page