Equipment Outlet Names
Record what equipment is plugged into the Equipment Centre and Connect 8 Expansion
Module. This will enable you to name each channel when you set up the touch screen control
Example:
Channel 1 Viron 3 speed Pump
Channel 2 Arc underwater Light
Channel 1 _________________________________________________________________
Channel 2 _________________________________________________________________
Channel 3 _________________________________________________________________
Channel 4 _________________________________________________________________
Channel 5 _________________________________________________________________
Channel 6 _________________________________________________________________
Channel 7 _________________________________________________________________
Channel 8 _________________________________________________________________
Notes: _________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
_________________________________________________________________
To Next Page
Loading...
