EQStarPro User Guide www.astro-gadget.com
11
5.6. SynScan Pro screen:
5.7. EQStarPro WiFi Settings Configuration via SynScan Pro
By default, the EQStarPRO operates in Access Point mode, with an SSID of EQStarPro and no
WiFi security password. The Settings -> Wifi Settings form in SynScan Pro can be used to set a
password for better security.
5.8. Using SkySafari Planetarium for EQStarPro Control
SkySafari 6.0+ can be used from an Android cellphone to control goto operations using the
SynScan Pro application via a local network connection to that app. SynScan Pro must be
running along with SkySafari. In SkySafari, select a ‘Wifi’ connection with an IP address of
127.0.0.1 and port of 11882.
To Next Page