EasyManua.ls Logo

Astro Pneumatic 3027 User Manual

Astro Pneumatic 3027
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product Type:Model:
3027
12V 3" MINI CORDLESS PISTOL POLISHER
W/ 2 BATTERIES
Page 1
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
The 3027 3" cordless polisher is designed to rapidly
polish small areas such as bumper recesses, door sills
and headlights. Only use attachments made for use with
this tool. Do not use this tool outside of the designed
intent. Never modify the tool for any other purpose or use.
Caution: To help prevent personal injury
• Use of this product can expose you to chemicals
including ethylene glycol, gasoline vapors and
engine exhaust, which are known to the State of
California to cause cancer, birth defects, or
reproductive harm. For more information, visit
www.P65Warnings.ca.gov. Always wear ANSI
approved safety equipment, safety glasses and
clothing when using this product. Study, understand,
and follow all instructions provided with this product.
Failure to read and follow all warnings and operating
instructions may result in damages and serious
injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and By standers).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in
serious injury or death.
• Always select the correct accessories of the correct
size and design for the job that you are attempting to
perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle
is in secure position, and will not move during repair.
WARNING
WARNING
www.astrotools.com
1 YEAR LIMITED WARRANTY
Astro Pneumatic Tool Co. warrants our products to the
original user against defective material or workmanship
for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the
right to determine whether the product failed because of
defective material, workmanship or other causes and to
charge back for missing parts. Astro Pneumatic Tool
Co., at its discretion, will repair products covered under
this warranty free of charge. The distributor should
direct the original user to return the product (with the
exceptions listed below) with the distributor’s name,
address, adequate proof of date of purchase or a copy
of warranty card, and a short note explaining the
problem. Failures caused by accident, alteration, or
misuse are not covered by this warranty.
Astro Pneumatic Tool Co. or its authorized service
representatives must perform all warranty repairs. Any
repair to the product by unauthorized service represen-
tatives voids this warranty. The rights under this
warranty are limited to the original user and may not be
transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed
or implied, including warranties of merchantability and
fitness for a particular purpose. Some states do not
allow the exclusion of limitations of incidental or conse-
quential damages so the above limitations may not
apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
PRODUCT INFORMATION
BEFORE USE
DO NOT DISCARD – GIVE TO USER
• Compact lightweight pistol style 3" polisher with
2-position side handle and ergonomic comfort grip
• Includes 2 Lithium-Ion batteries, charge level indicator
on polisher and wall charger for minimal down time
• High/Low power settings for 0-2800RPM/0-8300RPM
perfect for small trim, door sills, grills, headlight
restoration and more
Drive style: Spindle Thread Size - 5/16" x 24T
No-load speed: Low 0-2800/RPM (Polishing speed)
High 0-8300/RPM (High speed polishing or sanding)
Rechargeable battery: 12 volt/1.5 Ah Lithium-ion
Battery charger voltage rating: AC 100-240V 50-60 Hz
Charger output: 13.5v@0.4Amps
Charge time: 3-4 hours
Specification:
When unpacking, check the parts diagram and part
number listing on page 4 to make sure all parts are
included. If any parts are missing or damaged,
please call your distributor.
Question and Answer IconNeed help?

Do you have a question about the Astro Pneumatic 3027 and is the answer not in the manual?

Astro Pneumatic 3027 Specifications

General IconGeneral
Air Consumption4 CFM
TypeRandom Orbital Sander
Average Air Pressure90 PSI
Hose Size3/8 inch
Pad Size6 inches
Free Speed12000 RPM
Air Inlet1/4" NPT

Summary

General Safety Warnings

Intended Use

Specifies the designed purpose and limitations of the 3027 cordless polisher.

Safety Precautions

Essential safety guidelines to prevent personal injury and property damage.

Product Information and Warranty

Product Features

Highlights compact design, dual batteries, and variable speed settings for optimal use.

Limited Warranty Details

Outlines the terms and conditions of the 1-year limited warranty for the product.

Operational Guidelines

Workplace Security

Guidelines for maintaining a safe and secure work environment during operation.

Personal Safety Measures

Crucial personal safety measures to protect the operator from potential hazards.

Tool Usage and Maintenance

Proper methods for using and maintaining the tool to ensure safety and longevity.

Specific Use Precautions

Precautions related to battery charging, usage, and handling potential hazards.

Care and Cleaning

Instructions for cleaning and maintaining the tool's performance and appearance.

Environmental Protection

Guidelines for responsible disposal of electronic components and waste.

Setup and Operation

Before Initial Use

Key steps to follow before operating the 12V polisher for the first time.

Battery Charging Procedure

Detailed steps for charging the battery pack using the provided charger.

Operating Tips

Advice for maximizing control and efficiency during tool operation.

Accessory Installation

Instructions for installing backing pads and hook & loop polishing pads.

Usage Tips

Recommendations for effective and safe usage, including testing and pressure.

Operation and Parts

Tool Operation

Guidance on inserting batteries, selecting speed, and using the trigger.

Battery Status Display

Explanation of the LED indicators for battery charge level.

Parts Breakdown and List

Diagram and list of all components included with the cordless polisher.

Related product manuals