ASTRO Junior User Manual

Astro Junior
F-1x2
F-1-1F-2
F-3-1
F-3
F-4-1F-4
F-5
F-0
F-15
F-17
F-16
F-12
F-0-0
F-0-5
F-5F-6
F-7
F-8
F-9
F-10
F-11
4x4mm Balsa strips
F-30
F-18
F-29
6x6mm Balsa strips
F-19
F-44
F-62
F-52
4x4mm Balsa strips
4x4mm Balsa strips
4x4mm
Balsa strips
F-26
F-26
F-47
F-46
F-47
F-26
F-2-1
F-12-1
F-22
F-23
F-21
E-15
F-24
4x4mm
Balsa strips
4x20mm
Round pole
Z-1
Z-1-1
Z-2
Z-3
Z-4
Z-7
Z-7
Z-5
Z-8
Z-6
F-42
F-42
F-43
Z-9
Z-9
F-53
F-53
F-45
F-45
W-8-1
W-8-1
W-8-1
W-8
W-8
W-1 W-2
W-3-1
W-3
W-4
W-5
W-5
W-5
W-5
W-5
W-6
W-16
W-9
W-18
6x6mm
Paulownia wood strips
Fuselage installation
Sand the nose to the appropriate
shape with fuselage
1
Wing installation
2
1.2 Cockpit installation.
2.1 Wing construction.
1.1Fuselage construction.
1.6 Cover installation.
1.4 The rear of fuselage installation.
1.5 Cabin installation.
1.3 Nose installation.
integral Sanding, complete the installation of fuselage
F-4-1
1---7
F-46
F-0
F-0
Sand it to the appropriate shape
with fuselage.
Balsa Wood Airplane

ASTRO Junior Specifications

General

Brand	ASTRO
Model	Junior
Category	Toy
Language	English

Summary

Fuselage Installation

Fuselage Construction

Detailed steps for constructing the main fuselage structure, including component assembly.

Cockpit and Nose Assembly

Installation of the cockpit interior and the nose section of the airplane fuselage.

Rear Fuselage and Cabin Fitting

Steps for installing the rear fuselage components and the cabin area.

Fuselage Covering and Shaping

Instructions for covering the fuselage and sanding it to the correct aerodynamic shape.

Wing Installation and Construction

Wing Construction

Assembly and preparation of the airplane wings, including leading edge installation.

Wing Covering and Aileron Fitting

Steps for covering the wings and installing the aileron control surfaces.

Wing Assembly and Landing Gear

Installation of the lower wing cover, servos, landing gear, and wheels.

Tail Wing and Rear Wheel Assembly

Tail Assembly Steps

Instructions for assembling the tail wing components and rear wheel.

Other Assembly and Specifications

General Assembly and Motor Mount

Installing miscellaneous parts, including screws, magnets, and motor position.

Center of Gravity and Specifications

Guidance on setting the Center of Gravity and recommended equipment for the model.