ASTRO Ulti Box - How to Set Up Your Remote for TV Control; Remote Pairing Process; Testing and Saving TV Controls

Press and hold for 3 seconds
until the LED blinks twice.
Enter the 2-digit TV Code of your
TV Brand and wait for the LED to blink
twice.
Try out the TV controls (TV Standby,
Volume & TV Input) if they are working
correctly.
3
1 2
How to Set Up Your Remote for TV Control
Press Right arrow key and wait for
the LED to blink. Repeat Step .
No,
the TV controls have no response.
3
5
4
Press OK and wait for the LED to
blink twice to save the settings.
Press to exit the TV setup.
Yes,
the TV controls are working correctly.
TV Standby
TV Input
Volume
Right
arrow Key
16
Back to Contents