EasyManua.ls Logo

AstroAI 100 PSI - Troubleshooting

AstroAI 100 PSI
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
Air Compressor
will not inflate
Air Compressor
is operating
abnormally
Air leaking
through hose
● Ensure the in-line fuse is securely inserted
correctly;replace fuse if necessary.
● Check vehicle cigarette lighter fuse, it should
berated at 10A or higher.
● Ensure there is a strong connection with the
power cord and 12V socket.
● Preset tire pressure is lower than current tire
pressure, increase the preset tire pressure to
the manufacturer recommended level.
● The inflation nozzle is not connected properly
to the tire’s valve stem.
The 12V socket is not connected securely.
● Preset tire pressure is lower than current tire
pressure, increase the preset tire pressure to
the manufacturer recommended level.
● Ensure there is a firm connection between the
air nozzle and the tire valve.
Slow inflation
Shuts off after
extended use
● The inflation nozzle is not connected properly
to the tire’s valve stem.
● Excessive use will slow the inflation rate of the
pump. Let cool for 10 minutes.
● If the air compressor continues to run for more
than 15 minutes, it will shut off due to
overheating protection. Please let it cool for 10
minutes.

Related product manuals