ASUS A7N266 User’s Manual66
4. BIOS SETUP
4. BIOS SETUP
I/O Device Config
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port. [Normal]
allows normal-speed operation but in one direction only; [EPP] allows
bidirectional parallel port operation; [ECP] allows the parallel port to operate
in bidirectional DMA mode; [ECP+EPP] allows normal speed operation in
a two-way mode. Configuration options: [Normal] [EPP] [ECP] [ECP+EPP]
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the
selected ECP mode. This selection is available only if you select [ECP] or
[ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3]
[Disabled]
Onboard Game Port [200H-207H]
This field sets the I/O address to the game port. Configuration options:
[200H-207H] [208H-20FH] [Disabled]
Onboard MIDI [Disabled]
This field sets the I/O address for MIDI. Configuration options: [330H-
331H] [300H-301H] [Disabled]
To Next Page
Loading...
