81
5. SOFTWARE SETUP
ASUS A7N266 User’s Manual
5. S/W SETUP
ITEM 3: PCI Standard Ram Controller
1. Go to the Device Manager
2. Select PCI standard RAM Controller in “System Devices”
3. Click on “Properities.”
4. Click on “Driver.”
5. Select “update driver”
6. Select “Search for a better driver than the one your device is using now” option.
7. Click on “Specify the location” and then type or browse for the path on the CD-
ROM Drive:\Drivers\Chipset\Nvidia\win9x\MemoryController. This installs the
driver.
8. Click “Next.”
9. You should see two “NVIDIA nForce 220/420 Memory Controller” and one
“NVIDIA nForce 420 Memory Controller (DDR)” detected.
10. There is no need to restart if you need to install more drivers.
Drivers for Win98
To Next Page
Loading...
