Asus A7V - Page 16

Disassembly procedure
2 - 16
Removing Touch Pad Module
1. Remove 6 screws [M2 * 3(L)] and disconnect the Touch pad board FPC with
tweezers then take away the Touch pad bracket from the top case.
2. Separate the Touch pad board from the Touch pad bracket.
Removing LAUNCH BD. module
1. Remove 1 yellow mylar and disconnect the FPC.
2. Remove 4 screws [M2 * 4(L)] and take away the Launch BD. module.
TOUCH
PAD
MODULE
REMOVE
LAUNCH BD
MODULE
REMOVE