Disassembly procedure
2 - 18
LCD Module
The illustrations below show how to remove and disassemble the LCD module. The
module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, LCD front
cover, and LCD back cover.
Please do not disassemble the individual parts.
Disassembling LCD Module
1. Remove 8 rubber pads. And then 8 screws [M2.5 * 8(L)] underneath them.
2. Carefully pry the inside edges of the LCD front bezel and remove the LCD
front cover.
LCD
MODULE
LCD
DISASSEMBLY
To Next Page
Loading...
