Asus AX3000 User Manual

Power
On
2.4 GHz
On
5 GHz
On
Internet
On
Internet
1
Connect the powered-off
modem to the router’s 2.5
Gbps WAN/LAN port with an
Ethernet cable.
Power on the modem, and then wait
about 2 minutes for it to restart.
2
Set Up the Network
1. Connect your device to the router wirelessly
or with an Ethernet cable.
New Password:
Let’s Get Started
Conrm Password:
http://tplinkwi.net
Method TWO: Via a Web Browser
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to set
up the internet connection and register for
the TP-Link Cloud service.
Note: If the login window does not appear, please refer to Q2 of
Need Help? in this guide.
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
Scan for Tether Tether
or
Choose Your Device Type
Gaming Router
Range Extender
Wireless Router
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the button in the Tether app and
select Wireless Router > Standard
Routers. Follow the steps to complete
the setup and connect to the internet.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
2
Connect the power adapter to
the router and turn it on.
3
Connect the Hardware
Note: If the 2.4 GHz and 5 GHz LEDs are off, press and hold the WPS/Wi-Fi button on the back for more than 2
seconds. The LEDs should turn solid on.
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s 2.5 Gbps WAN/LAN port to it, then follow steps 3 and 4 to complete the hardware connection.
*Image may dier from actual product.
Unplug the power to turn o your modem, if any, and remove
the backup battery if it has one.
Refer to Q5 of Need Help? to place the router for optimal
Wi-Fi performance.
Modem
Unplug the power
Verify that the hardware connection is correct by checking the following LEDs.
4
1
Note: If you want to use the 1 Gbps WAN/LAN
port as the WAN port instead, please refer to
Q1 of Need Help? in this guide.

Asus AX3000 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Maximum Data Rate	3000 Mbps
LAN Ports	4 x Gigabit LAN
WAN Ports	1 x Gigabit WAN
USB Ports	1 x USB 3.1
MU-MIMO	Yes
Beamforming	Yes
OFDMA	Yes
Processor	1.5 GHz tri-core processor
Antennas	4 x External Antennas
AiMesh	Yes
Memory	256 MB Flash, 512 MB RAM
Frequency Bands	2.4 GHz, 5 GHz
Wi-Fi Speed	574 Mbps (2.4 GHz)
Security	WPA3

Summary

Connect the Hardware

Connect Modem to Router

Connect the powered-off modem to the router's 2.5 Gbps WAN/LAN port with an Ethernet cable.

Power On Modem

Power on the modem and wait approximately 2 minutes for it to restart.

Power On Router

Connect the power adapter to the router and turn it on.

Verify Hardware Connection LEDs

Check the Power, 2.4 GHz, 5 GHz, and Internet LEDs for correct connection status.

Set Up the Network

Method ONE: Via TP-Link Tether App

Guide for setting up the network using the TP-Link Tether mobile application, including downloading the app and logging in.

Method TWO: Via a Web Browser

Instructions for configuring the network via a web browser by entering the router's IP address and following setup steps.

TP-Link HomeShield Features

Network Protection

Detects cyber threats to protect privacy and connected devices.

Quality of Service (QoS)

Prioritizes bandwidth needs for a better networking experience.

Parental Controls

Manages online time and blocks inappropriate content for family safety.

Comprehensive Reports

Provides statistics and insights into home network usage.

USB Applications

Local Storage Sharing

Share files from a USB drive with devices on your home network.

Media Server

Play media from a USB drive on computers and smart devices.

Remote Access

Access the USB drive remotely when away from home.

Button Explanation

WPS/Wi-Fi Button Functions

Explains WPS pairing and toggling the Wi-Fi function by pressing the button.

Reset Button Function

Describes how to reset the router to factory default settings by holding the button.

Need Help? Troubleshooting

Using 1 Gbps WAN/LAN Port

Instructions for selecting the 1 Gbps WAN/LAN port for internet service during setup.

Accessing Web Management Page

Troubleshooting steps for when the web management page cannot be accessed.

Cannot Access Internet

Steps to resolve internet connectivity issues, including modem restart and DNS settings.

Forgotten Wireless Password

Guidance on retrieving or resetting the wireless password.

Optimal Wi-Fi Performance Positioning

Tips for positioning the router to achieve the best Wi-Fi signal strength.