Asus B85M-G PLUS - Page 28

1-20
Chapter 1: Product introduction
13. Chassis intrusion connector (4-1 pin CHASSIS)
Thisconnectorisforachassis-mountedintrusiondetectionsensororswitch.Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusionsensororswitchsendsahigh-levelsignaltothisconnectorwhenachassis
componentisremovedorreplaced.Thesignalisthengeneratedasachassisintrusion
event.
Bydefault,thepinlabeledChassisSignalandGroundareshortedwithajumper
cap.Removethejumpercapsonlywhenyouintendtousethechassisintrusion
detection feature.
B85M-G PLUS
B85M-G PLUS Chassis intrusion connector
+5VSB_MB Chassis Signal GND
CHASSIS