Need help?Do you have a question about the Asus B85M-G PLUS and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Chipset | Intel B85 |
| CPU Socket | LGA 1150 |
| Memory Slots | 4 |
| Memory Type | DDR3 |
| Maximum Memory | 32GB |
| Memory Standard | DDR3 1600/1333/1066 MHz |
| PCIe x16 Slots | 1 |
| PCIe x1 Slots | 2 |
| SATA 6Gb/s Ports | 4 |
| SATA 3Gb/s Ports | 2 |
| Audio | Realtek ALC887 8-Channel High Definition Audio CODEC |
| RAID Support | RAID 0, 1, 5, 10 |
| USB 3.0 Ports | 4 (2 rear, 2 front/via header) |
| LAN | Realtek RTL8111G Gigabit LAN Controller |
| USB 2.0 Ports | 8 (4 rear, 4 via headers) |
Guidelines to prevent electrical shock hazards during system operation and component handling.
Best practices for safe installation, handling, and environmental considerations for the motherboard.
Details CPU socket type, supported processors, and the chipset used on the motherboard.
Outlines memory types, capacities, and integrated graphics output capabilities.
Describes the types and number of expansion slots and SATA connectors available.
Details the onboard LAN controller and audio codec specifications.
Lists the number and types of USB ports available on the motherboard.
Highlights proprietary ASUS technologies for performance, protection, and ease of use.
Details ASUS 5X Protection mechanisms for enhanced durability and reliability.
Details internal motherboard connectors and key BIOS feature sets.
Lists manageability features and supported operating systems for the motherboard.
Lists essential precautions to take before installing components or changing settings.
Guides on studying chassis compatibility and placement direction for the motherboard.
Visual guide to the components and connectors on the motherboard's PCB.
A numbered list detailing the location and page reference for each connector, jumper, and slot.
Describes the LGA1150 socket and compatible Intel processors for this motherboard.
Step-by-step instructions and diagrams for safely installing a CPU into the socket.
Guidance on mounting the CPU heatsink and fan, including Thermal Interface Material application.
Explains the four DDR3 DIMM sockets and their dual-channel configuration.
Provides rules for installing DIMMs, including size, type, and OS limitations.
Visual steps on how to correctly insert a memory module into a DIMM slot.
Procedure for physically installing add-in cards like graphics or network adapters.
Steps for setting up BIOS and drivers after installing an expansion card.
Instructions on how to reset BIOS settings to default by clearing the CMOS memory.
Identifies and describes the function of each port on the motherboard's rear I/O panel.
Details the functionality and specifications of USB, HDMI, and DVI-D ports.
Describes the 24-pin EATXPWR and 4-pin ATX12V connectors for power supply units.
Details the connection for the chassis's front panel audio module.
Describes the connection for a serial port module used for communication devices.
Guides on connecting CPU and chassis fans to the motherboard headers.
Explains how to back up and update the motherboard's BIOS file for stability and features.
Methods to access the BIOS setup utility during system startup or after POST.
Detailed settings for CPU voltage regulation efficiency and power saving modes.
Adjusting CPU core voltage, override, and offset modes for overclocking.
Adjusting CPU cache voltage, override, and offset modes.
Settings related to CPU features, cores, virtualization, and power management.
Configuring EIST, Turbo Mode, and CPU C-states for power and performance.
Options for SATA mode selection (IDE/AHCI), LPM, and SMART status.
Options for legacy USB support, xHCI mode, EHCI hand-off, and individual USB port control.
Enabling/disabling onboard HD audio, front panel type, SPDIF, LAN controller, and PXE ROM.
Enables and configures automatic CPU fan speed adjustments based on temperature.
To Next Page
