Asus B85M-G PLUS - Page 65

ASUS B85M-G PLUS
2-35
PS/2 Keyboard and Mouse Support [Auto]
SelectanyofthesesettingswhenPS/2keyboardandmouseareinstalled.Thesesettings
onlyapplywhenFastBootisenabled.
[Auto] ForafasterPOSTtime,PS/2deviceswillonlybeavailablewhenthe
systembootsuporrebootedwhenthePS/2deviceshavenotbeen
reconnectedorchanged.IfyoudisconnectorchangePS/2devicesbefore
restartingthesystem,PS/2deviceswillnotbeavailableandBIOSsetup
programwillnotbeaccessibleviaPS/2devices.
[FullInitialization]Forfullsystemcontrol,PS/2deviceswillbeavailableduringPOSTatany
circumstances.ThisprocesswillextendPOSTtime.
[Disabled] ForthefastestPOSTtime,allPS/2deviceswillnotbeavailableuntilyour
computerenterstheoperatingsystem.
Network Stack Driver Support [Disabled]
[Disabled] SelecttoskipthenetworkstackdriverfromloadingduringPOST.
[Enabled] SelecttoloadthenetworkstackdriverduringPOST.
Next Boot after AC Power Loss [Normal Boot]
[NormalBoot] ReturnstonormalbootonthenextbootafterACpowerloss.
[FastBoot] AcceleratesthebootspeedonthenextbootafterACpowerloss.
2.8.2 Boot Logo Display [Auto]
[Auto] AdjustslogoautomaticallybasedonWindows
®
displayrequrements.
[FullScreen] Maximizethebootlogosize.
[Disabled] HidethelogoduringPOST.
Setthisitemto[FullScreen]tousetheASUSMyLogo2feature.
POST Delay Time [3 sec]
ThisitemappearsonlywhenyousetBoot Logo Displayto[Auto]and[FullScreen].This
itemallowsyoutoselectthedesiredadditionalPOSTwaitingtimetoeasilyentertheBIOS
setup.YoucanonlyexecutethePOSTdelaytimeduringNormalBoot.Thevaluesrange
from0to10seconds.
Thisfeaturewillonlyworkundernormalboot.
Post Report [5 sec]
ThisitemappearsonlywhenyousetBoot Logo Displayto[Disabled].Thisitemallowsyou
toselectadesiredpostreportwaitingtime.Congurationoptions:[1sec]~[10sec][Until
PressESC].
2.8.3 Bootup NumLock State [On]
[On] Setsthepower-onstateoftheNumLockto[On].
[Off] Setsthepower-onstateoftheNumLockto[Off].