E410
55
English
Quickly enter the BIOS
To access the BIOS before the PC boots into the OS, try any of the
following:
• Beforebootingupthesystem,insertastraightenedpaperclip
into the BIOS key.
• Pressthepowerbuttonforatleastfoursecondstoshutdown
your PC, then press the power button again to turn your PC back
on, and press <F2> during POST.
• WhenyourPCiso,disconnectthepowercordfromyourPC’s
power connector. Reconnect the power cord and press the power
button to turn on your PC. Press <F2> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your PC.
X
BIOS key