EeeBox PC 47
English
Using the USB storage device (USB
Restore)
When the Recovery Partition in your system is crashed, use the USB
storage device to restore the system to the factory default partition
or the factory environment data to the entire hard disk.
1. Disable Boot Booster in BIOS setup.
2. Connect the USB storage device that you back up the factory
environment data to.
3. Press <ESC> on bootup and the Please select boot device
screen appears. Select USB:XXXXXX to boot from the connected
USB storage device.
4. Select the language and click Next.
5. Select Restore and click Next.
6. Select a task and click Next. Task options:
• Restore the OS to the Default Partition only
Select this option if you simply want to restore the OS to the
factory default partition. This option deletes all data on the
system partition “C” and keeps the partition “D” unchanged.
After you click Next, the factory default partition will be
displayed. Click Next again.
• Restore the Whole Hard Disk
Select this option if you want to restore your EeeBox PC to the
factory default state. This option deletes all data from your hard
disk and creates a new system partition as drive “C” , an empty
partition as drive “D“ and a Recovery Partition.
7. Data on the factory default partition or on the whole hard disk
will be cleared depending on the option you selected in the
previous step. Click Restore to start the task.
8. When the restore is completed successfully, click Reboot to
restart the system.
To Next Page
Loading...
