21
Chapter 2: Using your ASUS
All-in-One PC
Assembling the base of your
ASUS All-in-One PC
1. Place the ASUS All-in-One PC on a at and stable surface such as
a table or desk.
2. Align and attach the base to the stand. Ensure that the stand is
tted rmly and aligned properly to the base.
NOTE: The stand ts to the base in one orientation only.
3. Secure the base to the stand with the bundled screw using a
Phillips or a at screwdriver. You can also use a coin or token.
base
stand
screw
NOTE: The illustration
above is for reference only.
The actual base of your
AiO may vary depending
on the model but the
installation steps remains
the same.
To Next Page
Loading...
