28
Image
Sharpness: This setting can be adjusted using values
between 0 to 100.
Aspect Control: Select the aspect ratio to “Full” or
“OverScan”. This setting is available only when you use the
All-in-One PC as a standard desktop LCD monitor.
Auto Adjust: Adjusts the horizontal position (H-Position)
and the vertical position (V-Position) of the display. This
feature is available only when you use the All-in-One PC as a
standard desktop LCD monitor.
Input Select
PC: Displays video produced by the All-in-One PC.
HDMI: Display video input from the HDMI Input port.
System Setup
OSD Setup:
1. H-Position - Adjusts the horizontal position of the OSD
menu.
2. V-Position - Adjusts the vertical position of the OSD
menu.
3. OSD Timeout - Sets the display duration of OSD menu
from 10 to 120 seconds.
4. DDC/CI - Enables or disables the DDC/CI (Display Data
Channel/Command Interface).
Information: Displays resolution and refresh rate.
Language: Sets the OSD language.
All Reset: Resets all OSD settings to defaults.
Exit
Exit from the OSD menu.
To Next Page
Loading...
