Asus ET2300INTI - Connecting to the Internet

4
Connecting to the Internet
Access emails, surf the Internet, and share applications via social networking sites on or from
your All-in-one PC using wireless/Wi-Fi or wired connection.
Wi-Fi connection
To set up your Wi-Fi connection:
1. Do the following steps to activate Wi-Fi in your All-in-one PC:
a) Launch the Charm bar.
b) Tap and tap .
c) Select an access point from the list of available Wi-Fi connections.
2. Tap Connect to start the network connection.
NOTE: You may be prompted to enter a security key to activate the Wi-Fi connection.
3. If you want to enable sharing between your All-in-one PC and other wireless-enabled
systems, tap Yes, turn on sharing and connect to devices. Tap No, don't turn on
sharing or connect to devices if you do not want to enable the sharing function.
Wired connection
To set up your wired connection:
1. Use a network (RJ-45) cable to connect your All-in-one PC to a DSL/cable modem or a
local area network (LAN).
2. Turn on your computer.
3. Congure the necessary Internet connection settings.
NOTES:
• For more details, refer to the sections Conguring a dynamic IP/PPPoE network connection or
Conguring a static IP network connection.
• Contact your Internet Service Provider (ISP) for details or assistance in setting up your Internet
connection.