Need help?Do you have a question about the Asus F1A55-M LX3 R2.0 and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM |
| Maximum internal memory | 32 GB |
| Supported memory clock speeds | 1066, 1333, 1600, 1866 MHz |
| Processor socket | Socket FM1 |
| Processor manufacturer | AMD |
| Compatible processor series | AMD A, AMD E2 |
| Number of SATA connectors | 4 |
| Number of EATX power connectors | 1 |
| USB 3.2 Gen 1 (3.1 Gen 1) connectors | 0 |
| Headphone outputs | 3 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Audio chip | Realtek ALC887 |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | AMD A55 FCH |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| RAID levels | 0, 1, 10, JBOD |
| Supported storage drive interfaces | SATA II |
| Parallel processing technology support | - |
| Cables included | SATA |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | UEFI |
| ACPI version | 2.0a |
| BIOS memory size | 64 Mbit |
Weight and Dimensions| Depth | 186 mm |
|---|---|
| Width | 226 mm |
Guide to installing the APU (processor) onto the motherboard, following sequential steps and visual cues.
Instructions for attaching the CPU fan and heatsink assembly to the motherboard for proper cooling.
Details on how to correctly insert RAM modules into the designated motherboard slots for system memory.
Instructions for connecting SATA data and power cables to storage devices like HDDs and SSDs.
Guidance on inserting expansion cards, such as graphics or network cards, into PCIe slots.
Steps for connecting the motherboard's front panel connectors for power buttons, LEDs, and USB ports.
Instructions for connecting the main ATX power supply cables to the motherboard for system power.
Procedure for powering on the system and installing the operating system and necessary drivers.
To Next Page