Need help?Do you have a question about the Asus H110M-K D3 and is the answer not in the manual?
General| Non-ECC | Yes |
|---|---|
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 2 |
| Supported memory types | DDR3-SDRAM, DDR3L-SDRAM |
| Maximum internal memory | 32 GB |
| Supported memory clock speeds | 1333, 1600, 1866 MHz |
| Processor socket | LGA 1151 (Socket H4) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Celeron, Intel Pentium |
| Intel® Core i3/i5/i7/i9 series | i3-6xxx, i5-6xxx, i7-6xxx |
| USB 2.0 connectors | 1 |
| Number of SATA II connectors | 0 |
| Number of SATA III connectors | 4 |
| Supported storage drive interfaces | SATA III |
| BIOS type | UEFI AMI |
| ACPI version | 5.0 |
| BIOS memory size | 16 Mbit |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| LAN controller | Realtek RTL8111H |
| Ethernet interface type | Gigabit Ethernet |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel® H110 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Windows operating systems supported | Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64 |
| Maximum graphics card memory | 1024 MB |
| Parallel processing technology support | - |
Weight and Dimensions| Depth | 183 mm |
|---|---|
| Width | 226 mm |
Clears Real Time Clock (RTC) RAM in CMOS and system setup parameters.
Clears Real Time Clock (RTC) RAM and CMOS setup information using a jumper.
Connects a USB 3.0 module for front/rear panel ports.
Connectors for ATX power supply plugs.
Connects to SATA 6.0 Gb/s hard disk drives.
Connects SATA 6.0 Gb/s drives, supports RAID configurations.
Connector for chassis-mounted functions like power/HDD LEDs and buttons.
Connector for chassis-mounted functions like power/HDD LEDs, speaker, and buttons.
Connector for chassis-mounted functions including power/HDD LEDs, speaker, and buttons.
Connector for chassis-mounted functions like power/HDD LEDs, speaker, buttons, and intrusion.
For a Trusted Platform Module (TPM) system for security and integrity.
For a Trusted Platform Module (TPM) system for security and integrity.
Allows installation of M.2 (NGFF) SSD modules.
Connector for the SATA power cable to supply power to SATA devices.
Clears BIOS setup information when the system hangs.
To Next Page
