Asus H170-PLUS D3 - Ai Tweaker: BCLK and Core Ratio

BCLK Frequency [100]
ThisitemallowsyoutosettheBCLK(baseclock)frequencytoenhancethesystem
performance.Usethe<+>or<->toadjustthevalue.Thevaluesrangefrom40.0MHzto
340.0MHz.
WerecommendyoutosetthevaluebasedontheCPUspecication,ashighBCLK
frequenciesmaydamagetheCPUpermanently.
BCLK Spread Spectrum [Auto]
ThisitemallowsyoutostartoverclockingthesystemfromtheinitialBCLK(baseclock)
frequencytotheassignedBCLKfrequency.Usethe<+>or<->toadjustthevalue.Thevalue
rangesdependonthevalueyousetonBCLKFrequency.
2.5.2 ASUS MultiCore Enhancement [Auto]
[Auto] Thisitemallowsyoutomaximizetheoveclockingperformanceoptimized
byASUScoreratiosettings.
[Disabled] Thisitemallowsyoutosettodefaultcoreratiosettings.
2.5.3 CPU Core Ratio [Auto]
ThisitemallowsyoutosettheCPUcoreratiolimitpercoreorsynchronizeautomaticallyto
allcores.Congurationoptions:[Auto][SyncAllCores][PerCore]
WhentheCPUCoreRatioissetto[Sync All Cores]or[Per Core],thefollowingitems
appear.
1-Core Ratio Limit [Auto]
Select[Auto]toapplytheCPUdefaultTurboRatiosettingormanuallyassigna1-CoreLimit
valuethatmustbehigherthanorequaltothe2-CoreRatioLimit.
2-Core Ratio Limit [Auto]
Select[Auto]toapplytheCPUdefaultTurboRatiosettingormanuallyassigna2-CoreLimit
valuethatmustbehigherthanorequaltothe3-CoreRatioLimit.
Ifyouassignavaluefor2-CoreRatioLimit,donotsetthe1-CoreRatioLimitto [Auto].\
3-Core Ratio Limit [Auto]
Select[Auto]toapplytheCPUdefaultTurboRatiosettingormanuallyassigna3-CoreLimit
valuethatmustbehigherthanorequaltothe4-CoreRatioLimit.
Ifyouassignavaluefor3-CoreRatioLimit,donotsetthe1-CoreRatioLimitand2-Core
RatioLimitto[Auto].
4-Core Ratio Limit [Auto]
Select [Auto]toapplytheCPUdefaultTurboRatiosettingormanuallyassigna4-CoreLimit
valuethatmustbehigherthanorequaltothe3-CoreRatioLimit.
Ifyouassignavaluefor4-CoreRatioLimit,donotsetthe1-CoreRatioLimit,2-CoreRatio
Limit,and3-CoreRatioto[Auto].
2-20 Chapter 2: Getting started