Asus H170I-PRO - Motherboard Connector Layout (1.2.1)

1-2
Chapter 1: Product introduction
1.2.1 Layout contents
Connectors/Jumpers/Slots/LED
Page
1.
CPUandchassisfanconnectors(4-pinCPU_FAN,4-pinCHA_FAN1/2) 1-2
2.
ATXpowerconnectors(24-pinEATXPWR,4-pinEATX12V) 1-2
3. Intel
®
LGA1151CPUsocket 1-3
4. ClearRTCRAM(2-pinCLRTC) 1-3
5. DDR4DIMMslots 1-3
6. Speakerconnector(4-pinSPEAKER) 1-4
7. Systempanelconnector(10-1pinF-PANEL) 1-4
8. Intel(R)H170SerialATA6Gb/sconnectors(7pinSATA6G_3~6,SATAEXPRESS) 1-4
9. USB2.0connector(10-1pinUSB910,USB1112) 1-4
10. USB3.0connector(20-1pinUSB3_12) 1-5
11. M.2Socket3 1-5
12. PCIExpress3.0/2.0x16slot 1-5
13. Digitalaudioconnector(4-1pinSPDIF_OUT) 1-5
14. Frontpanelaudioconnector(10-1pinAAFP) 1-6
15 TPMHeader(14-1pinTPM) 1-6
16 Serialportconnector(10-1pinCOM) 1-6
17 RTCbatteryheader(2-pinBATT_CON) 1-6
2. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)
TheseconnectorsareforATXpowersupplyplugs.Thepowersupplyplugsare
designedtottheseconnectorsinonlyoneorientation.Findtheproperorientationand
pushdownrmlyuntiltheconnectorscompletelyt.
1. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2)
Connectthefancablestothefanconnectorsonthemotherboard,ensuringthatthe
black wire of each cable matches the ground pin of the connector.
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
CHA_FAN
Do not forget to connect the fan cables to the fan connectors.
Insufcientairowinsidethesystemmaydamagethe
motherboard components. These are not jumpers! Do not place
jumpercapsonthefanconnectors!TheCPU_FANconnector
supportsaCPUfanofmaximum1A(12W)fanpower.
Onlythe4-pinCPUfansupportstheASUSFanXpert2+feature.