Asus H81M-CS - 2.1.2 ASUS EZ Flash 2

2-2
Chapter 2: Getting started
2.1.2 ASUS EZ Flash 2
TheASUSEZFlash2featureallowsyoutoupdatetheBIOSwithoutusinganOS-based
utility.
Beforeyoustartusingthisutility,downloadthelatestBIOSlefromtheASUSwebsiteat
www.asus.com.
To update the BIOS using EZ Flash 2:
1. InserttheUSBashdiskthatcontainsthelatestBIOSletotheUSBport.
2. EntertheAdvanced ModeoftheBIOSsetupprogram.GototheToolmenutoselect
ASUS EZ Flash 2 Utilityandpress<Enter>toenableit.
3. Press<Tab>toswitchtotheDriveeld.
4. PresstheUp/DownarrowkeystondtheUSBashdiskthatcontainsthelatestBIOS,
andthenpress<Enter>.
5. Press<Tab>toswitchtotheFolder Infoeld.
6. PresstheUp/DownarrowkeystondtheBIOSle,andthenpress<Enter>toperform
theBIOSupdateprocess.Rebootthesystemwhentheupdateprocessisdone.
 ThisfunctionsupportsUSBashdisksformattedusingFAT32/16onasinglepartition
only.
 EnsuretoloadtheBIOSdefaultsettingstoensuresystemcompatibilityandstability.
SelecttheLoadOptimizedDefaultsitemundertheExitmenu..
 DONOTshutdownorresetthesystemwhileupdatingtheBIOStopreventsystem
bootfailure!