Need help?Do you have a question about the Asus Hyper M.2 x16 Gen 4 and is the answer not in the manual?
General| Interface | PCIe 4.0 x16 |
|---|---|
| Supported Devices | M.2 NVMe SSDs |
| M.2 Slots | 4 |
| M.2 Form Factor | 2242/2260/2280/22110 |
| M.2 Key | M key |
| Supported Drive Type | NVMe |
| Max Data Transfer Rate | 64 Gbps (per slot) |
| Cooling | Passive |
This switch allows you to turn the fan on or off.
LEDs indicate data read/write activity on M.2 storage devices.
Interface for installing the card into a motherboard's PCIe slot.
Connectors for installing PCIe M.2 storage devices.
Rubber pads for compatibility with double-sided M.2 storage devices.
Remove six cover screws securing the card's cover before installation.
Instructions for using M.2 rubber pads based on drive type.
Secure the stand screws onto the ASUS HYPER M.2 X16 GEN 4 CARD.
Install M.2 storage devices into connectors and secure them.
Apply thermal pads, reattach cover, and install card into PCIe slot.
Adjust BIOS settings for RAID configuration on Intel/AMD motherboards.
Details regarding compliance with FCC Rules for this device.
Compliance statement for Innovation, Science and Economic Development Canada.
Statement on compliance with Japan's VCCI regulations for Class B ITE.
Warning statement for Korean KC certification for electronic equipment.
ASUS commitment to environmental regulations like REACH and RoHS.
Compliance with Vietnam's RoHS regulations for ASUS products.
Compliance with Turkey's RoHS regulations (AEEE Yönetmeliği).
Information on ASUS's recycling and takeback programs for environmental protection.
Warning for cancer and reproductive harm as per California regulations.
Contact details for ASUSTeK Computer Inc. in Taiwan.
Contact details for ASUS America.
Contact details for ASUS Germany/Austria.
To Next Page
