9. Select Broadband (PPPoE) and click
Next.
10. Enter your User name and, Password,
and Connection name. Click Connect.
11. Click Close to finish the configuration.
12. Click the network icon in the taskbar
and click the connection you just
created.
13. Enter your user name and password.
Click Connect to connect to the
Internet.
Configuring a static IP network connection
To configure a static IP network connection:
1. Repeat steps 1 to 4 of the previous section.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and
Gateway from your service provider.
4. If needed, enter the preferred DNS Server
address and alternative address.
5. When done, click OK.
ASUS K30DA 35
ENGLISH
ENGLISH
To Next Page
Loading...
