Asus M2N-L - Remote Access Configuration

4-24 Chapter 4: BIOS setup
USB 1.1 Controller [Enabled]
Enables or disables the USB 1.1 Controller.
Conguration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Enables or disables the USB 2.0 Controller.
Conguration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the
legacy USB support is disabled.
Conguration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps).
Conguration options: [FullSpeed ] [HiSpeed ]
BIOS EHCI Hand-Off [Enabled]
Enables or disables the BIOS EHCI hand-off feature.
Conguration options: [Disabled] [Enabled]
4.4.7 Remote Access Conguration
The items in this menu allows you to congure the Remote Access type and and
parameters.
Remote Access Type [Disabled]
Allows you to set the Remote Access Type.
Conguration options: [Disabled] [Enabled]
Congure Remote Access type and parameters
Remote Access [Disabled]
Select Remote Access
type.